އެއުރެންނަށްޓަކައި،
އެއުރެންނަށްވުރެންނަށްވުރެންނަށްވުރެންނަށްވުރެންނަށްވުރެންނަށްވުރެންނަށްވުރެންގެ
އެއުރެންނަށްޓަކައި،އެއުރެންނަށްޓަކައި،އެއުރެންނަށްޓަކައި،އެއުރެންނަށްޓަކ
ފޯންސް:
ބޮޑުގައިވާ
ފަހެً
2025-06-05 31
ADSS (All-Dielectric Self-Supporting) cable is revolutionizing fiber optics. Unlike traditional cables, it doesn’t need metal supports. This makes it lighter and corrosion-resistant.
Key advantages:
No need for separate messenger wires
Immune to electromagnetic interferenceWww.adsscable.cn
Ideal for harsh environments (coastal/industrial areas)
⚠ Warning: Don’t confuse ADSS with standard OPGW cables. ADSS has lower tension tolerance (max 20kN vs 30kN for OPGW).
Source: 2024 Fiber Optic Association Report
Fun fact: Our team deployed ADSS cables in a 2025 Indonesian project. They withstood 120km/h typhoon winds – something traditional cables failed at.
Route Survey: Check for obstacles (trees, buildings). Use GIS mapping tools.
Tension Calibration: Never exceed 20% of max tensile strength.
Sag Adjustment: Maintain 1-2% sag for thermal expansion.
Dead-End Clamping: Use triple-layer clamps every 50 meters.Www.adsscable.cn
OTDR Testing: Verify signal loss (<0.4dB/km at 1550nm wavelength).
Pro tip: Always wear dielectric gloves when handling ADSS cable ends.
Mistake #1: Over-tightening during installation → Causes microfractures
Solution: Use dynamometer tension control
Mistake #2: Ignoring galloping vibration → Leads to fatigue failure
Solution: Install dampers at 1/3 span intervals
Mistake #3: Cheap splice closures → 60% of failures start here
Solution: Invest in IP68-rated closures (we learned this the hard way in Mumbai last year)
The global ADSS cable market will hit $4.2B by 2026 (MarketsandMarkets 2025). Two exciting developments:
Smart ADSS: Embedded sensors monitor strain/temperature in real-time
Eco-friendly jackets: New PE compounds reduce carbon footprint by 40%
However, note that these upgrades may increase costs by 15-20%.Www.adsscable.cn
✅ Annual visual inspection for jacket damage
✅ Biannual tension verification
✅ Clean insulators every 6 months
✅ Document all splice locations (GPS coordinates preferred)
✅ Replace vibration dampers after 5 years